6 Useful Shower Repair Tips to Fix a Leak



No homeowner would like a leaking shower in their bathroom. It is not just an annoying inconvenience, but it can also lead to tons of wasted money and natural resources. If you don’t want your water bills to skyrocket, you’ve got to the source of your leaking shower and fix it. Here a six useful shower repair tips to help you get started:

Try to Fix the Showerhead

The first thing you have to do is try your best to fix the showerhead. Start by shutting the main water supply valve to avoid flooding your home. Once that’s done, you can unscrew the showerhead. Evaluate the following for wear and tear:
 Condition of head
 Check the O-ring threads
 Assess the plastic washer

Unclog the Showerhead Holes

Showerhead holes often clog up, especially if you’ve got a hard water source that has a lot of sedimentation. Often, clog holes result in a leaking shower. Once debris builds up over time with frequent use, the showerhead holes get blocked. As a result, the water will find another way to escape and leak from other parts of the showerhead. You can soak the showerhead with limescale solution or baking soda with vinegar to soften the clog. Then brush off the debris to clear the holes.

Replace What’s Worse for Wear

After your showerhead visual inspection, replace the parts that look worse for wear. For example, the rubber washer is the most common culprit of leaking showerheads. With a faulty rubber washer, water will always escape. Thankfully, you can buy a replacement washer in the hardware and place it back to solve the issue. Alternatively, you can buy a new showerhead. There are many affordable fixtures online as a replacement.

Check Out the Piping Connectors




Top Article

If you’ve tried your best to fix the showerhead, but the leak is still there, check out the connections. Look at the part where the showerhead meets your water supply. This is a very common area where leaks occur. Remember, keep the main valve shut off before investigating the leak source. Assess if the leak is coming from the hot or cold water pipe by feeling it with your fingers. Once you’ve identified where the issue is, you can repair the proper valves. You can also replace the seals in between the pipes and the shower unit to control the leak.

Clean Up the Pipes

Don’t forget to clean the pipes before you put everything back together. You must wash the valves and pipes thoroughly to ensure seamless functionality. You can use a cleaning solution made out of warm distilled vinegar diluted in some water. This can take out sediments and signs of corrosion. After this, the valves will be much easier to use because water will flow freely.

Call for Professional Help

If you cannot solve the leak after doing the steps above, it is time to call a plumber. A reputable plumber can easily do shower repair services. They have the skills, tools, and expertise to ensure you don’t have to waste a lot of money on your monthly utility bills.

Book Your Appointment

Leave a Reply

Your email address will not be published. Required fields are marked *